Source manufacturer since 2018 · Henan, China
Applications
Every stage has its own failure mode and its own material that fixes it. These are the problems we see come up again and again in the plants we supply.
Hot metal sits in the ladle or torpedo car losing temperature before it reaches the converter. Every degree lost has to be paid for later in the heat.
A Hot Metal Ladle Covering Flux forms an insulating layer on the surface, cutting radiation losses and keeping the metal hot until it is charged.
Slag that is too viscous resists desulphurisation and holds inclusions, and the operator compensates by adding more lime — which makes things worse and costs money.
A Slag Fluidizer lowers the slag melting point and improves fluidity, so desulphurisation proceeds faster and lime consumption drops.
High power input and long tap-to-tap times make slag control critical. Poor slag practice wastes energy and lengthens the heat.
Fluxing agents tailored to your slag system keep the slag reactive at lower lime addition, shortening the heat and cutting energy per tonne.
During refining and transport, the steel surface is exposed to air and radiates heat away. That means temperature loss, reoxidation and inclusions that never leave the bath.
A Ladle Covering Flux forms a continuous liquid layer that insulates the bath, blocks secondary oxidation and absorbs rising inclusions.
The tundish is the last place you can keep the steel clean. Poor cover means heat loss, reoxidation, and nozzle clogging that shows up later as surface and internal defects.
Tundish Covering Flux insulation plus correctly graded Ladle Sand: the bath stays hot and clean, and the ladle opens first time at the caster.
Two problems cost money at the same time: surface defects on the ingot skin, and pipe and shrinkage cavities in the riser that force you to crop the top.
Ingot Teeming Flux keeps the steel surface protected and lubricates the mould, while an Exothermic Hot Topping Compound keeps the riser liquid so defects stay in the head and get cropped cleanly.
Risers that freeze too early leave shrinkage porosity in the casting — and that means rejection, re-work and unhappy customers.
Riser exothermic and feeding agents designed for the section size you cast, so the riser feeds the casting properly and solidification stays directional.
Experience
Vietnam, Thailand, Indonesia, Malaysia and Singapore are the markets we ship to regularly. We know how the hot, humid climate affects storage and packing — and we pack accordingly.
Lined bags and jumbo bags that keep the product free-flowing on arrival, not caked solid.
Invoice, packing list and export documents prepared so the container clears without being held.
Technical discussions in English or Vietnamese with the people who actually make the product.
Run a small batch to your specification so you can verify performance before committing to volume.
Describe the symptom — temperature loss, nozzle clogging, surface defects, shrinkage pipe. We will tell you the most likely cause and how to deal with it.
